Description
COMM-400-8 is a versatile dual stereo / 4-zone, 400w sound and 600m² induction loop system for village halls, community rooms and similar venues and is supplied ready for you to install.
The sound system is supplied with 8 x 8″ black or white wall cabinet speakers with fixing brackets (4 x pairs of black or white speakers) – the amplifier can drive a maximum of 2 speakers on each zone at 4Ω or 8Ω low impedance. Please note that this system is high power, low impedance and excessive volume and bass may damage the loudspeakers – if you are after a system for ‘disco’ level music please see our other sound systems.
Comprising of a mixer, amplifier with four independant 100w amplifier outputs allowing a maximum of two speakers on each output. The mixer includes an integral MP3 media player and Bluetooth receiver. We supply the mixer, amplifier, speakers with wall brackets, speaker cable and a microphone with cable.
This sound system is ready for you to connect optional CD or media players, wireless microphones etc.
This package must be wired as a low impedance 4-8Ω sound system – please see user manuals tab
This Induction loop system is designed for areas up to 600m² in Churches, public buildings, meeting halls, sports venues and schools etc.
We supply a complete set of equipment ready for you to install – the induction loop amplifier, white wall mounting boundary microphone with mic cable, link cable so that you can connect the line level signal from your public address PA sound system to the loop, matching pre-amp to maintain signal level between main amplifier and loop amplifier, induction loop tester etc.
Mixer and Media Player:
- Bluetooth connectivity
- Media player with USB playback and FM tuner
- Inputs : mic/line: 3 x XLR (bal/unbal)
- Inputs : aux: 2 x L+R RCA
- Input : line: 3.5mm jack to media player
- Dimensions: 482 x 130 x 44 mm
- Weight: 1.43 kg
Amplifier:
- Switchable bridge or parallel mono modes
- Switchable high and low pass filters
- Configurable as a quad, stereo or 2.1 system
- Fully balanced audio signal path
- Full audio and power protection with peak limiter
- Power supply: 220-240Vac, 50/60Hz (IEC)
- Modes: 2 x Stereo, Parallel (mono), Bridge (mono)
- Input sensitivity: 0dB = 0.775Vrms
- Crossover: Input A 120Hz LPF and C+D 120Hz HPF (all switchable)
- Input connections: 4 x XLR female
- Sound output: 4 x SPK connectors
- Dimensions: 482 x 308 x 44mm (without feet)
- Output : rms @ 4 Ohms: 4 x 200W
- Output : rms @ 8 Ohms: 4 x 100W
- Bridge power @ 8 Ohms: 2 x 400W (both pairs of channels bridged)
- Weight: 4.393kg
- Use terminal block to extend speaker cable
- Do not short speaker cables together
Speakers:
- Packed in pairs – ie: order 4 pairs and receive 8 speakers
- 8″ bass speaker
- Compact full range system with a high-quality plastic cabinet
- Bass speaker and tweeter
- Bass-reflex system
Microphone:
- Dynamic handheld microphone
- XLR to jack lead
Loop amplifier:
- Induction loop amplifier with output for areas up to 600m²
- Plugtop IEC mains lead provided
- Inputs: 3 x mic or line inputs
Boundary microphone for Induction Loop:
- Black or White
- Wall mounting
- Designed for Induction loop systems
- Metal housing
Loop receiver / tester:
- 3.5mm mono connection for headphones ≥ 32Ω (supplied)
- Volume control
- Low cut filter
- Belt clip
- Battery powered
- Dimensions: 68 x 110 x 21mm
- Weight: 95g
System Includes:
- 1 x Stereo mixer with Bluetooth and media player
- 1 x 400w quad slave Amplifier
- 8 x 8″ black or white speakers with wall brackets (4 pairs of speakers)
- 1 x Cabled microphone with XLR to jack lead and 10m XLR extention lead
- 2 x Input connector leads for MP3 players etc.
- 4 x Speakon connectors
- 100m reel speaker cable – see options
- 1 x 600m² Loop amplifier
- 1 x Matching pre-amp to maintain signal level between main amplifier and loop amplifier
- 1 x Loop tester with earphones and headphones
- 1 x Black or white boundary microphone with 3m microphone cable – see options
- 1 x Audio input cable for connection to sound system amplifier
- 100m reel loop cable – see options
Sound Services deliver this complete sound system without extra charge to most mainland UK addresses
Speaker cable assembly and installation of these systems require some DIY assembly skills – you should only require basic DIY tools together with speaker, amplifier and cable fixings etc.
Constant development means that illustrations are only representative and items supplied may be newer or improved models that are available at the time of your order
See the ‘User Manuals’ tab on the left of this page – as manufacturers are making instruction sheets and user manuals available for download only and your purchase may not include a printed version
Not quite right for you?
Ask us to quote a custom PA sound system
Shipping from the EU & Third Party Depots
Reviews
There are no reviews yet.